Extruder Barrel - Extruder Screw Barrel Design and Manufacturing Factory-China Bloom

Call: + (86) -512-89598069

Address: 2106 B Building, Wanda Center, Zhangjiagang, Jiangsu, China.

Email: kara@ttxalloy.com

Modular co-rotating twin-screw compounding screw layout showing feed, melting kneading blocks, side feeder, mixing zone, vacuum vent, and metering zones along the barrel.

By

Compounding & Masterbatch Extruder Screws: TSE Guide

Compounding and masterbatch production live or die on the screw configuration. Unlike straightforward extrusion, where the screw just needs

The two problems with glass-filled engineering plastics: abrasive glass fiber wearing the extruder screw, and excessive shear breaking fibers short and weakening the finished part.

By

Extruder Screws for Engineering Plastics: PC, PA (Nylon), and ABS (2026 Guide)

Engineering plastics punish a generic screw specification in ways commodity polymers never do. Nylon and polycarbonate absorb moisture from

The three common PVC extruder screw and barrel failure modes: corrosion pitting from HCl, flight thinning from filler abrasion, and scorch at the die from too-aggressive compression ratio.

By

PVC Extruder Screw & Barrel: Material, Coating & Ratio

PVC is one of the most punishing polymers a screw and barrel will ever see. As a factory that

By

Blown vs Cast Film Extrusion Screw Sourcing Guide (2026)

1. Why Film Screw Specification Is a Multi-Million-Dollar Engineering Decision A polymer film extrusion line is one of the

By

Specifying Twin-Screw Extruders for Lithium Battery Separator Manufacturing: 8 Engineering Decisions for Wet and Dry Process Lines

1. Why Separator Extruder Specification Demands Engineering Rigor The lithium battery separator is a low-mass, high-stakes component: a 5–20

Twin screw extruder used in plastics compounding, recycling, food extrusion, and pharmaceutical processing.

By

Top 15 Twin Screw Extruder Manufacturers in 2026: A Complete Buyer’s Guide

Choosing the right twin screw extruder (TSE) supplier is one of the highest-leverage capital decisions a compounder, masterbatch producer,

By

Bimetallic vs Nitrided Barrel: Which One Should You Choose?

Bimetallic vs Nitrided: Head-to-Head Comparison

By

Extrusion Process Optimization: Decoding the 7 Key Parameters Affecting Output and Stability

Step into any plastic extrusion workshop and observe the most common “process adjustment.” The first instinct of most floor

By

Extruder Screws and Barrels: A 2026 Selection and Sourcing Guide for Engineers and Procurement Teams

Why Screw and Barrel Selection Determines Your Plant’s Real Operating Cost If you have ever sat in a production

By

38CrMoAlA for Extruder Screws:Advantages, Real Limitations

Walk into almost any polymer compounding plant and ask what material the screws are made from. Nine times out

Copyrights © 2026 All Rights Reserved by BLOOM